Atmospheric Plasma Solutions

Mobile Handheld

Surface Preparation System

an innovation
in surface preparation

  • remove coatings
  • clean surfaces
  • promote adhesion

4 Key Benefits

  • Process in media and chemical free - no clean up, no containment
  • Portable power supply and handheld pen can reach anywhere on the job site
  • Inputs of only air and electricity make it fast to deploy
  • Safe, ergonomic and easy for the operator to learn.

NDI/NDT Use Cases

  • Strip back ahead of welding
  • Visual inspection of cracks, dents and seams
  • De-painting of complex surfaces
  • Boiler and tank inspection

Easy to Deploy

  • Compact and
    portable
  • Only requires air
    and electricity
  • Setup and ready
    to use in
    under 5 minutes

Mechanical Specifications

Dimensions: 12" x 14" x 22" 31 cm x 36 cm x 56 cm
Weight: 34 lbs 15.4 kg
Plasma Cable Length: 20 ft 6.1 meters

Electrical Specifications

Input Power 208-240 VAC, 50-60Hz, single-phase or 440-480 VAC, 3-phase
Input Current: 18 Amps, CE-14.5 Amps
Default Plug Type: NEMA L6-30 for 208-240 VAC and NEMA L16-30 for 440-480 VAC
Optional Plug Type: NEMA 16-20, NEMA L14-20, NEMA L14-30, NEMA L15-30 3-phase
Device EMC Status: Class A Group 2
Applicable CE Standards: EN/IEC 61326-1:2013 IEN/IEC 60974-10 IEC/EN 60974-1
Degree of Protection: IP 52

Operating Specifications

Operating Temperature 14°F - 110°F -10°C - 43°C
Operating Humidity <95%, non-condensing
Elevation <10,000 ft <3,000 meters
Operating Sound Level ~90 dBa
Input Compressed Air Pressure 80-100 psi 550kPa-690kPa, 5-7 bar
Burst Pressure 120psi 827kPa, 8 bar
Optimal Input Compressed Air Flow 3.5 CFM 99 SLM

Proven effectiveness on coatings, sealants, and substrates

The PB 7000-M system has been shown effective in removing a wide range of coatings and sealants from a wide variety of substrates. The technology has been validated by Fortune 100 companies and in projects and related contracts with the US Navy, US Air Force, NATO and the Strategic Environmental Research and Development program (SERDP).

Coatings

  • Acrylics
  • Alkyds
  • Latex
  • Epoxies
  • Polyurethanes
  • Polyesters
  • Powder Coats
  • Silicone / Polysiloxanes
  • Polyurea
  • Coal-Tar Epoxy
  • Ultra High Solid Epoxies

Sealants

  • Elastomeric
  • Caulking
  • Polysurlfide
  • Polyether
  • Butyls
  • Acrylics
  • Rubber
  • Silicones
  • Polyurethane

Substrates

  • Steel alloys
  • Cast Iron
  • Aluminum alloys
  • Titanium Alloys
  • Magnesium Alloys
  • Carbon Fiber
  • GRP / Fiberglass
  • Composites
  • Concrete, Masonry, Brick
  • Ceramics

...and more

11301 Penny Road., Suite D Cary, NC 27518

(919) 341-8325

info@apsplasma.com

https://apsplasma.com

Jeff Pavelka PlasmaBlast® Global Sales Manager

Mobile: (252) 266-6170

Office: (919) 341-8325 ext. 120